 
 |
| 원래 장소: | 치안스, 중국 (본토) |
| 브랜드 이름: | Jkongmotor |
| 인증: | CE, ROHS,ISO9001 |
| 모델 번호: | PMG35 |
| 최소 주문 수량: | 3-10PCS |
|---|---|
| 가격: | US$7.5~US$6.2 |
| 포장 세부 사항: | 수출 판지로. 깔판을 가진 큰 양 |
| 배달 시간: | 표본을 위해, 배치, 15-25days를 위한 7-15 일/ |
| 지불 조건: | , 서부 동맹 paypal, T/T L/C |
| 공급 능력: | 100000 PC / 달 |
| NEMA: | PMG3560-01 | 납선: | ul1007 26# |
|---|---|---|---|
| 경향: | 0.4A | 토크를 보전되기: | 12kg.cm |
| 모터 길이: | 35mm | 중량: | 115g |
| 저항: | 30±7%Ω | 유도자: | 16±20%mH |
| NO.of 단계: | 4개 단계 | 감속비: | 1/60 |
| 하이 라이트: | 12V hybrid servo stepper motor,PM hybrid servo stepper motor,pm stepper motor With gearbox |
||
12V 4phase 0.4A 12kg.cm PMG35 Series Geared Stepper Motor
motores paso a pas
1.Brief Introduction of PMG stepper motor
The PM stepper motor with gearbox (PMG) is a combination of the stepper motor and various gearboxes. It can realize low speed and large output torque.
Working Principle
This product is an open-loop control system that converts pulse signal into angular or linear displacement. The amount of displacement can be controlled by adjusting the number of pulses, so accurate positioning can be achieved.
Features
High torque, fast dynamic response, low noise, low cost
Drive Mode
Unipolar or bipolar, constant voltage drive
2.Genaral Specification of 7.5 degree stepper motor:
| Item | Parameter Value |
| Step Angle Accuracy | ± 7% (full step, no load) |
| Resistance Accuracy | ± 10% |
| Temperature rise | 80℃ Max. (rated current, 2 phase on) |
| Ambient Temperature | -20℃~+50℃ |
| Insulation Resistance | 100MΩ Min., 500V DC |
| Dielectric Strength | 650V AC, 1s, 3mA |
3.Electrical Specification of stepper motors:
| Model | Step Angle (Deg.) |
No. of Phase | Rated Voltage (V) | Current per Phase (A) | Resistance per Phase (Ω) | Holding Torque (g·cm) | Detent Torque (g·cm) | Gear Ratio |
| PMG2505-01 | 7.5/5 | 2 | 2.6 | 0.52 | 5 | 450 | < 150 | 1:5 |
| PMG2505-02 | 15/5 | 2 | 3.5 | 0.365 | 9.6 | 500 | < 150 | 1:5 |
| PMG2510-01 | 7.5/10 | 2 | 2.8 | 0.467 | 6 | 1400 | < 500 | 1:10 |
| PMG2530-01 | 7.5/30 | 4 | 13.3 | 0.11 | 120 | 4000 | < 1400 | 1:30 |
| PMG3519-01 | 7.5/19 | 4 | 24 | 0.218 | 110 | 1200 | < 2280 | 1:19.25 |
| PMG3519-02 | 7.5/19 | 4 | 12 | 0.4 | 30 | 1000 | < 2600 | 1:19.25 |
| PMG3508-01 | 7.5/8.4 | 4 | 12 | 0.4 | 30 | 4100 | < 500 | 1:8.4 |
| PMG3530-01 | 7.5/30 | 4 | 12 | 0.4 | 30 | 15000 | < 1500 | 1:30 |
| PMG3560-01 | 7.5/60 | 4 | 12 | 0.4 | 30 | 28000 | < 3000 | 1:60 |
| PMG35120-01 | 7.5/120 | 12 | 0.4 | 30 | 50000 | < 6000 | 1:120 |
4.Dimensions of geared stepper motor: (Unit=mm)
5.Common Problems and Solutions of PM Stepping Gear Motor:
Out-of-step caused by insufficient torque and failure of oiling bearing may occur. These can be solved by increasing the torque of the motor and using ball bearing. Our after-sale personnel will ask customers about the use of the products irregularly. According to the feedback from the customers, we will conscientiously sum up, learning from the successful experience and correcting the deficiencies.
6.Application of PM Step Electromechanical Device with Gear Box:
Household appliance industry: Air conditioners, refrigerators, intelligent sanitary ware, automatic door locks
Industrial control industry: Monitor, electronic meter, valve control system
Office automation industry: Dot matrix printer, fax, scanner
Vehicle industry: Throttle, etc.
담당자: Annie
전화 번호: +8615995098661
팩스: 86-519-88713769
주소: 건물 A2, 후땅 공업 지구, 링다오 Rd, 우진 지구, 창주, China.Zip :213162
공장 주소:건물 A2, 후땅 공업 지구, 링다오 Rd, 우진 지구, 창주, China.Zip :213162
